Microfluidic Mixers with THREE Input Ports (CROSS-Channel)
The main channel of this three-input ports fused silica glass microfluidic chip is patterned with asymmetrical sets of chevrons designed to facilitate streams mixing.
[Note: Mixing is a function of numerous application specific parameters such as operational pressure, viscosity, etc. – we make no representation that the mixing chips listed below are suitable for your specific application.]
As with all of our standard fused silica glass chips, this model has microfluidic channels with an optically clear (transparent) ceiling and a translucent floor.
Available in top-down or bottom-up version.
These microfluidic chips are available with or without connectors:
- Without connectors -- part number ends with –N
- With Luer connectors -- part number ends with –L
- With UpChurch Nanoport connectors -- part number ends with -U
** Please note that the bonding agent may extend beyond the connector footprint
Not sure what connectors you need? The following article “What type of connectors should I order?” may help you.
SPECIFICATIONS:
Material and Fabrication
- Made from high-quality Fused Silica Glass
- Layers are thermally fused together
Glass Chip:
- 2" long x 1" wide
- Thickness is either 1.5mm or 1.17mm, depending on Version (Top Down or Bottom Up)
- Graduated reticle (1mm spacing) running perpendicular to channel
- Configuration: Select from table below (Top-Down [Ports on top], or Bottom-Up[Ports on bottom])
Microfluidic Features:
- Microfluidic channel with nearly vertical walls and flat bottom
- Chevron covers ~ 1/2 main channel length (below the junction point)
- Channel Ceiling: Flat, Transparent (Optical quality)
- Channel Floor: Flat, Translucent
- Channel Width: 100 micron
- Channel Height: 100 micron (not including chevrons)
- Fluid Connectors: Select from table below (None, Luer, Upchurch)
Select the chip(s) you want to purchase from the table below and forward your selection to our Sales department
